MaxMeyer Stopper
Stopper 3800
Stopper 3800 is a universal top-quality, all-purpose polyester knifing putty suitable for substrates such as sheet iron, aluminium, galvanised metal.
It has very short drying times and smooth knife application, is easy to shape, doesnot drip from the knife and can be quickly sanded. Thanks to its fine and balanced granular structure,
Stopper 3800 does not leave holes and is suitable both for compounding small repair areas and for thick coats.
Product Code: 1.831.3800
MaxMeyer Preperation Range
Degreaser 3600
Anti silicone Degreaser 3600 is recommended for use on every job and is an alternative to the AQUAMAX® Precleaner. This product is especially designed to remove dirt, oils, waxes, silicone and other contaminant agents from bare metal areas before painting larger areas. Degreaser 3600 is best used from a pump spray bottle and for safety reasons, it is best used in an extracted area to prevent any solvent build up.
Features and Benefits
- Easy and quick application: Greatly simplifies the implementation of the preparatory work.
- Easy removal of contaminating agents from paintable substrates: Reduced risk of product contamination.
- Robust application properties: It performs very well at all temperatures and with any kind of job
Product Code: 1.931.3600
Aquamax Precleaner 4501
The AquaMax Precleaner is recommended for use on every job. It is designed for the easy removal of any water based contaminant that can cause serious problems in the paint process, including corrosion. AquaMax Precleaner is best used from a pump spray bottle and also provides easy removal of water based glue stickers.
Features and Benefits
- Easy removal of contaminating agents from paintable substrates: Reduced process time and product contamination.
- Waterborne Precleaner designed to reduce organic solvent emissions: Complies with Health and Safety legislation.
Product Code: 1.931.4501
MaxMeyer Aerosol Range
1K PlastiPrimer Aerosol
1K PlastiPrimer is an adhesion promoter for plastics is a one-pack adhesion promoter for the painting of all plastics exceptPC, ABS and PUR. It can be used as an adhesion promoter for the majority of non pre-treated OE plastic parts used in the Automotive Industry. Supplied in a practical and convenient aerosol spray can.
Features and Benefits
- Easy and quick application.
- Quick drying
Product Code: 1.880.1600/E0.4
HP Aerosol Primer - Grey & Dark Grey
1K Hp Aerosol Primer has been specially developed to be used for rub-throughs to bare metal and for use on small spot repairs. An excellent, fast drying primer that offers protection against rust. The HP Aerosol Primer guarantees optimum adhesion to bare metal. The HP Primer Aerosol can be used both before applying primer and on any areas which have become exposed while sanding the primer.
Features and Benefits
- Available in M4 Grey and M6 Dark Grey shades: Cost Saving as fewer coats of paint are needed to achieve the required coverage.
- Easy-to-use and apply: Leading to increased productivity for your bodyshop.
- Ready-to-use and fast drying: process time saving in both mixing and booth time.
Product Code: Grey: 1.880.2000/E0.4 / Dar Grey: 1.880.2006/E0.4
Spot Blender 5411 Aerosol
Ideal for use on spot, panel and multi panel repairs the new Spot Blenders 1.912.5411 and 1.912.5421 from MaxMeyer melts overspray on repair edges to deliver a market leading final appearance with no visible fade-out edge with minimal polishing required.
Features and Benefits
- Easy to use with very good wetting of the surface and fast flash off: Painter speed and confidence in the repair process
- Excellent melting of the overspray edge: Minimal polishing required, increasing productivity
- Ready-for-use: Applied direct to the fade out edge offering a high quality finish to the fade out process.
Product Code: 1.912.5411/E0.4
MaxMeyer Primers
1K PlastiPrimer
1K PlastiPrimer is an adhesion promoter for plastics is a one-pack adhesion promoter for the painting of all plastics except PC, ABS and PUR.
It can be used as an adhesion promoter for the majority of non pre-treated OE plastic parts used in the Automotive Industry.
Features and Benefits
- Easy and quick application.
- Quick drying
Product Code: 1.880.1500/E1
CFE : Chromate Free Wash Etch Primer 7050 & Activator 7051
Product Description
Chromate Free Wash Etch Primer has excellent corrosion resistance and adhesive properties and can be used over a wide range of surfaces including steel, aluminium and galvanized metals.
The long pot life (5 days) increases the flexibility of working and reduces waste within the Bodyshop
Features and Benefits
- Easy and Quick Application
- Painters can confidently apply this Etch Primer in the knowledge that it will produce an excellent finish and reduce process times.
- Fine Overspray Edge: An extremely fast flash-off and fine overspray edge means that there’s no need to de-nib.
- 5 day pot life means you can use the same product you mixed on the Monday for the whole week making it very economical.
- Substrated Adhesion: Painters can be confident that this Etch Primer can be applied to many different surfaces including steel, aluminium and galvanised metals.
Mix Ratio 1:1
Product Code: Primer : 1.815.7050/E1 / Activator : 1.815.7051/E1
Maxi-Build 4:1 Primer 4024
Product Description
Maxi-Build 4:1 Primer is an extremely high-solid 2K acrylic primer, with simple and error proof 4:1:1 mixing ratio that provides high build on vertical applications, is extremely easy to sand and gives good final appearance.
It’s fast flash-off and drying times makes it suitable for air-drying.
Mixing Ratio by Volume
Maxi-Build : 4
HARDENER : 1
THINNER: 1
Product Code: 1.856.4024/E2
HP Multiprime - 2K Primer White M1, Grey M4, Dark Grey M6
Product Description
HP Multiprime can be used over unsanded e-coat and gives excellent final appearance even in wet-on-wet primer mode.
Easy to use and easy to spray, 9101, 9104 and 9106 give all the advantages in terms of process efficiency from a wet-on-wet primer, but with improved hold out leading to better quality of finish.
HP MultiPrime can also be used as a holding primer helping to push jobs through the booth quicker.
With multi-substrate capability, these new primers offer optimum final appearance making it the right choice for the repairer. HP MULTIPRIME can be applied over:- New panels in good quality electrocoat, without sanding. GRP and Fibre glass prepared with P120/P240 and finished with P320. Polyester filler prepared with P120/P240 and finished with P320. Original finishes in sound condition, after sanding with P400 Dry. Bare Plastic Substrates that have been prepared according to TDS 228V and 499V
Mixing Ratio by Volume
HP MULTIPRIME : 2
HARDENER : 1
THINNER: 0.5
Product Code: Grey 1.841.9104/E3. White 1.841.9101/E1. Dark Grey 1.841.9106/E1
Multi-Dry Primer White M1, Grey M4, Dark Grey M6
Product Description
Multi-Dry Primer is a fast drying 2K primer that has been optimized to be compatible with AquaMax Extra or MAXICAR® basecoats. A VOC Compliant Primer, offered with a dedicated hardener and two thinners (STD and HT), to comply with different ranges of temperatures.
Designed to deliver excellent airdrying properties: it provides 80 – 100 microns sandable in 30 mins @ 20 °C.
The Multi-dry Primer is based on an acrylic technology that ensures the air-dry performance does not vary depending on humidity conditions.
The launch of this sustainable product allows customers to be confident of the process, that will be energy efficient and environmentally-friendly.
Besides the good drying properties, the painter will enjoy using this product for the dry film thickness versatility (from 80μ - max 140μ).
Easy to apply in one visit application. 1 light coat followed by 2-4 full coats without flash-off
Fast drying and easy to sand.
Mixing Ratio by Volume
HP MULTIPRIME : 3
HARDENER : 1
THINNER: 0.5
Product Code: White (M1) 1.856.6111/E3 .Grey (M4) 1.856.6114/E3. Dark Grey (M6) 1.856.6116/E3
MaxMeyer Clearcoats
UHS Extra Clear 0396
Product Description
UHS Extra Clearcoat and its dedicated hardeners and thinners have been developed by MAXMEYER® brand using the latest technology to provide an easy to use, extremely fast product which can be used on any sized repair delivering an excellent final appearance.
This provides the repairer with a clear and simple choice of clearcoat.
This clearcoat has been designed for use over Aquamax Extra and Maxicar.
It uses a dedicated hardener to achieve the best performance and a choice of thinners to cover all temperatures.
Features
- Extremely fast drying times with quick repair process time and energy saving
- Hard finish for easy polishing and no popping for easy rectificationmaking it user-friendly and less risk of re-work.
- Air Dry capable - Dust free in 20 minutes
- Fast Application process - One visit
Mixing Ratio by Volume
UHS Extra Clear : 2
UHS HARDENER 2937 : 1
THINNER 6076 : 0.6
Product Code: 1.360.0396/E5
Matt 0710 Clear & Semi-Gloss 0750 Clear
Product Description
A dedicated semi-gloss clearcoat and matt clearcoat (for the very low gloss finishes) with the additional benefit of being able to blend the two together to provide any level of gloss in between. This provides the flexibility to create the perfect match whatever the local conditions or variations between vehicles. It is also possible to blend the basecoat so there is no need to go edge to edge and risk colour variation.
0710 and 0750 offer simple mixing ratios, there is no need to add complicated matting agents, and can be used for any size of repair.
Both clearcoats are quick and easy to apply, and to denib or remove any dirt.
Product Code: Matt 1.360.0710/E1 Semi-Gloss 1.360.0750/E1
